GT-7049-DH4   CREEP TESTER

CREEP TESTER

  This instrument is designed to measure the creep and stress relaxation of plastic material under temperature from 0℃ to 50℃.
A) With a specified temperature, preload a given stroke (0 to 30mm) to the specimen. Then, compress the specimen under a constant stroke for a period for time. Meanwhile, measure and record the change in force and time.
B) With a specified temperature, preload a given force (0 to 10kN) to the specimen. Then, compress the specimen under a constant force for a period of time. Meanwhile, measure and record the change in stroke and time.

Item Specification
Capacity 10kN
Load Resolution 1/65,000
Force Resolution 0.15N
Load Accuracy ±0.5%
Stroke 0.001~30.000 mm
Stroke Accuracy 0.01mm(magnetic railings ruler)
Preload Spee 1.0mm/min
Specimen Thickness T=1.0~5.0mm
Test Temperature 0.0~-50.0℃
Temperature Accuracy ±2.0℃
Temperature Uniformity +/-1.0%(F.S)
Control System PLC control & HMI system
Temperature Control BTC control system / P.I.D and SSR
Freezing System Hermetic compressor, cascade system and eco-friendly refrigerant
Cooling Method Air cooling
Heating System Hot air circulating system
Outer Surface Staneless varnish
Heat Preservation Material Hard foam
Observation Window Vacuum insulated glass window (5 layers) with lighting
Dimension (W×D×H) 105×89×166cm
Power 1∮, 220V , 50/60Hz

 


*Specification and content are subjected to change without notice.

Download the full PDF file

Download

Products